Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tempe, AZ
Tempe is a city built around its alleys, and that shapes every gate job here. The side-yard gates and back-alley service gates that sit at the curb of the 1950s-70s block-wall subdivisions are often the first security barrier a home has, and a sagging or seized gate turns a quiet alley into a block-wide access problem. We’re a gate-only company: installation, manual and automated repair, and the electric operators that drive them. Our technicians have up to 13 years of experience, and we work on whatever gate you have. Call (877) 657-0401 for a free estimate.
Why Tempe Homes Are Different
The core of Tempe was laid out before anyone planned for a car in every carport. Much of the housing in 85281, 85282 and 85283 is mid-century ranch and block-wall subdivision, with carports and rear alley access, and the gates on those lots were frequently retrofitted decades after the homes went up. Posts get set into hard desert caliche or cracked concrete, so a gate that leans is usually telling you about a footing, not a hinge. The south side of the city, in 85284, skews newer, with stucco-and-block master-planned homes and gates that are typically factory-hung and operator-ready.
The climate does its own work. Triple-digit summer heat bakes metal gates, warps wood pickets and dries out hinges and latches, then monsoon dust and wind-driven rain clog tracks and swell gate panels. Every Tempe gate runs through an expansion and contraction cycle all year, which loosens posts and knocks hardware out of alignment faster than in a milder climate. Add the alley network: the alleys are a city-maintained right-of-way, so a gate that swings open into one can draw a code notice for the whole block, not just the property it belongs to.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Tempe Services
Two jobs bring most Tempe homeowners to us: fixing the gate they have, and replacing the electric operator that runs it. Each has its own dedicated page.
Gate Repair in Tempe
Manual gate repair here usually starts at the ground. That leaning side-yard gate hanging over a failing post footing in caliche, or the alley gate that has swollen shut after monsoon season, is a structural fix before it’s a hardware fix. We look at hinges, latches, posts, frames and swing clearance, then correct what’s actually causing the failure rather than just tightening what’s rattling. For a focused look at the work, see gate repair.

Electric Gate Repair in Tempe
Automated gates fail in the parts most generalists won’t touch: control boards, safety sensors, power wiring and the operator motor itself. That’s our core specialty, not a referral. Whether your operator is an older Linear unit or a newer Ghost Controls system, we diagnose the fault at the board or the sensor and repair it, rather than defaulting to a full replacement. The full breakdown is on our electric gate repair page.

Gate Installation in Tempe
Gate Gate Installation in Tempe has to answer for the lots it sits on. A carport-centric mid-century property in 85282 needs a gate that fits a narrow side yard and clears a concrete alley apron, while a newer 85284 home often comes pre-wired for an operator. We measure the opening, check the posts, and specify hardware for a desert sun cycle instead of a milder climate. One call covers installation, whether the gate is manual or automated.
Automatic Gate Installation
Signs you need it
You’re opening the gate by hand several times a day, or an existing operator can’t be repaired reliably and you want a fresh system.
What it costs in Tempe
Automatic gate installation in Tempe typically runs $1,800-$4,500, and the written estimate sets the final price.
How we do it
We measure the opening, set or sleeve the posts, hang and align the gate, then mount the operator, run the power, wire the safety sensors and walk you through the programming.
Driveway Gate Installation
Signs you need it
You want a real driveway barrier for security or privacy and the current opening has no gate, or the old one is beyond repair.
What it costs in Tempe
A driveway gate installation in Tempe typically falls between $1,500-$4,000 for a manual gate, with automated systems running higher.
How we do it
We confirm swing or slide clearance on the concrete apron, set posts to proper footing depth, hang the panel, and align the latches and stops before testing the full swing.
What Gate Installation Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Manual side-yard gate installation | $600-$1,500 |
| Driveway gate installation | $1,500-$4,000 |
| Automatic operator installation | $1,800-$4,500 |
Do you need a permit for a new gate in Tempe?
It depends on the gate’s height, location and whether it sits near a right-of-way, so ask the city’s building department before the panel goes up. We’ll flag anything about your setup that usually prompts a check.
Can you automate an existing manual gate?
Often yes, if the frame and posts are sound and the swing is true. We inspect the gate first, then size an operator to it. If the posts are failing into caliche, we address that before adding automation.
Brands We Service in Tempe
We work on the brands most Tempe gates actually run on: Linear, Viking, Ghost Controls and DoorKing among them, along with the rest of the nine lines our technicians know. We can work on whatever gate you have, and we keep no stocked parts, so a repair turnaround depends on the failure and the part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tempe, AZ
| Service | Typical range in Tempe |
|---|---|
| Manual side-yard gate installation | $600-$1,500 |
| Driveway gate installation | $1,500-$4,000 |
| Automatic operator installation | $1,800-$4,500 |
| Electric gate repair | $150-$650 |
| Manual gate repair | $125-$450 |
| Gate hinge and latch replacement | $100-$300 |
| Post footing correction | $250-$900 |
| Safety sensor replacement | $150-$400 |
In Tempe, a failed post footing and a worn operator are what push the number up most often, since both take more labor than a hardware swap. The price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Tempe
We cover Tempe from the carport subdivisions and alley lots in the 85281 core through the newer stucco-and-block communities in the south. Dispatch runs from 7am to 7pm, Sunday through Friday, and same-day service is often possible on repairs. For a measured installation, we schedule the on-site estimate and work to your date.
- Maple-Ash
- Downtown Tempe
- Warner Ranch
- Alameda
- South Tempe
Service Area – Cities Near Tempe
Alley gates and block-wall subdivisions don’t stop at the city line, so we also handle gate work in the cities around Tempe. If you’re just outside our core Tempe coverage, we can usually reach you: Paradise Valley, AZ, Phoenix, AZ, Scottsdale, AZ and Fountain Hills, AZ are all in our wider service area. Call and we’ll confirm your address.
Serving Tempe, AZ – Our Local Coverage Area
We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tempe
We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside those hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 657-0401 for a free estimate.
Yes. Property managers and HOAs are a big part of our Tempe work, especially shared alley access gates and community entry operators. We diagnose the actual fault, document what we find, and coordinate access with the people who need it.
We serve Tempe and the surrounding East Valley, and we can usually reach the nearby cities in our service area. The core Tempe neighborhoods and their alley gates are our regular ground, so call and we’ll confirm your address.
If your gate is leaning, swollen, or the operator won’t respond, call us at (877) 657-0401 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. We’re gate specialists, so every technician and every part is purpose-built for gate work, and one call covers repair and installation. Call today and we’ll get your Tempe gate back where it belongs.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Tempe Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Alma Flores"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Nadia Khalil"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Steve Meyer